Protec have designed a strong light weight, non corrosive, extruded aluminium wall plate, designed in a concave shape which is quite unique in it’s self. When this plate is screwed to any wall, it protrudes 25mm out to keep your boards from being accidentally damaged in any way due to the wall. These wall plates are manufactured in three lengths, small at 650mm, medium at 1150 mm and large at 2.05 m, also available two models for racking boards/mals with fixed or set fins in them. For retail applications of racking boards/mals without any fixed or set fins in them. The wall plates have a series of holes 140mm apart in which a 70mm aluminium board post adaptor is inserted and fixed into position with screws. All wall plates then have foam rubber protector stripe over them which helps in keeping the board protected and free from any damage, after that a 400mm p.v.c plastic board post which is covered in a foam rubber tubing, pushed over the board post adaptor. This unique design allows you to remove any plastic post holder from the wall plate giving you even more distance in between the posts. These models have been designed to marry up to our great range of free standing display frames, giving you more choices on how you would like to rack your boards.
N.B. All models for racking boards with fins have a 140mm gap between posts.
N.B. Models for racking boards without fins have a 85mm gap between posts.
Model No: PRO-2BH
2 board rack. Two surfboard/mal/bodyboards horizontally on the wall
Dimensions: 2 @ 325mm
Model No: PRO-3BF
3 board rack. Small display frames
Dimensions: 650mm long
Model No: PRO-6BF
6 Board Rack. Racks six surfboards/mals with fins. Screws to wall or mecl display frame.
Dimensions: 1.15m long.
Model No: PRO-11BF
11 Board Rack. Racks 11 surfboards/mals with fins. Screws to wall or large display frames.
Dimensions: 2.05m long.
Model No: PRO-16B
16 board rack. Racks 16 surfboards/mals w/out fins. Screws to wall or large display frames.
Dimensions: 2.05m long.
Model No: PRO-1BH
Single board rack. One surfboard/mal flat on the wall.
Dimensions: 2 @ 400mm x 30mm
Model No: PRO-SUP
Racks 1 SUP/Club board horizontal on the wall.
Dimensions: 2 @ 1m x 30cm
This display rack is ideal to display a surfboard/Mal vertically or on any angle off the wall. Units consist of four rail brackets and one fin bracket, manufactured from 30mm alum flat bar covered in foam tube to prevent any damage.
Model No: PRO-1BD
Single display racks one short/mal surfboard on any angle flat on the wall.
2 brackets @ 50mm by 30mm,
1 fin bracket @ 100x120x30mm